View STE45NK80ZD06_4290950.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

STE45NK80ZD
N-channel 800V - 0.11 - 45A ISOTOP SuperFREDmeshTM MOSFET
General features
Type STE45NK80ZD

VDSS 800V
RDS(on) <0.13
ID 45A
Pw 600W
Extremely high dv/dt capability 100% avalanche tested Very low intrinsic capacitances Very good manufacturing repeatibility
ISOTOP
Description
The SuperFREDMeshTM series is obtained through an extreme optimization of ST's well established strip-based PowerMESHTM layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications. Such series complements ST full range of high voltage MOSFETs including revolutionary MDmeshTM products.
Internal schematic diagram
Applications
Switching application
Order codes
Part number STE45NK80ZD Marking E45NK80ZD Package ISOTOP Packaging Tube
June 2006
Rev 7
1/13
www.st.com 13
Contents
STE45NK80ZD
Contents
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Electrical characteristics (curves) ............................ 7
3 4 5
Test circuit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2/13
STE45NK80ZD
Electrical ratings
1
Electrical ratings
Table 1.
Symbol VDS VDGR VGS ID ID IDM
(1)
Absolute maximum ratings
Parameter Drain-source voltage (VGS = 0) Drain-gate voltage (RGS = 20 kW) Gate- source voltage Drain Current (continuous) at TC = 25C (Steady State) Drain Current (continuous) at TC = 100C Drain Current (pulsed) Total Dissipation at TC = 25C (steady state) Derating factor Value 800 800 30 45 28 180 600 5 7 8 2500 - 65 to 150 Unit V V V A A A A W W/C KV V/ns V C
PTOT PTOT
(2)
VESD(G-S) Gate source ESD(HBM-C=100pF, R=1.5kW) dv/dt Peak diode recovery voltage slope Insulation withstand voltage (AC-RMS) from all four terminals to external heatsink Operating junction temperature Storage temperature
VISO Tj Tstg
1. Pulse width limited by safe operating area 2. ISD 45A, di/dt 500 A/s, VDD V(BR)DSS.
Table 2.
Rthj-amb
Thermal data
0.2 40 C/W C/W Thermal Resistance Junction-ambient Max
Rthj-case Thermal Resistance Junction-case Max
Table 3.
Symbol IAR EAS
Avalanche characteristics
Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tj max) Single pulse avalanche energy (starting Tj = 25 C, ID = IAR, VDD = 35 V) Value 45 1.2 Unit A J
3/13
Electrical characteristics
STE45NK80ZD
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 4.
Symbol V(BR)DSS
On/off states
Parameter Drain-source Breakdown Voltage Zero Gate Voltage Drain Current (VGS = 0) Gate-body Leakage Current (VDS = 0) Gate Threshold Voltage Static Drain-source On Resistance Test conditions ID = 1 mA, VGS = 0 VDS = Max Rating VDS = Max Rating, TC = 125 C VGS = 20V VDS = VGS, ID = 150A VGS = 10V, ID = 22.5 A 2.5 3.75 0.11 Min. 800 10 100 10 4.5 0.13 Typ. Max. Unit V A A A V
IDSS
IGSS VGS(th) RDS(on)
Table 5.
Symbol gfs (1) Ciss Coss Crss Coss eq. (2) td(on) tr td(off) tf Qg Qgs Qgd
Dynamic
Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Equivalent output capacitance Turn-on delay time Rise time Turn-off delay time Fall time Total gate charge Gate-source charge Gate-drain charge Test conditions VDS = 15V, ID = 22.5 A Min. Typ. 35 26000 1620 260 700 105 128 350 174 558 121 307 781 Max. Unit S pF pF pF pF ns ns ns ns nC nC nC
VDS = 25V, f = 1 MHz, VGS = 0 VGS = 0V, VDS = 0V to 720V VDD = 400 V, ID = 20 A RG = 4.7 ,VGS = 10 V (see Figure 18)
VDD = 400 V, ID = 40 A, VGS = 10V
1. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS.
4/13
STE45NK80ZD
Electrical characteristics
Table 6.
Symbol ISD ISDM (1) VSD (2) trr Qrr IRRM trr Qrr IRRM
Source drain diode
Parameter Source-drain current Source-drain current (pulsed) Forward on voltage ISD = 45 A, VGS = 0 375 4.65 24.8 568 9.66 34 Test conditions Min. Typ. Max. 45 180 1.6 Unit A A V ns C A ns C A
Reverse recovery time I = 40 A, di/dt = 100A/s Reverse recovery charge SD VDD = 50 V, Tj = 25C Reverse recovery current Reverse recovery time I = 40 A, di/dt = 100A/s Reverse recovery charge SD VDD = 50 V, Tj = 150C Reverse recovery current
1. Pulse width limited by safe operating area. 2. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %.
Table 7.
Symbol BVGSO
Gate-source zener diode
Parameter Test Conditions Min. 30 Typ. Max. Unit V
Gate-source breakdown Igs= 1mA voltage (open drain)
2.1
Protection features of gate-to-source zener diodes
The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device's ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device's integrity. These integrated Zener diodes thus avoid the usage of external components.
5/13
Electrical characteristics
STE45NK80ZD
2.2
Figure 1.
Electrical characteristics (curves)
Safe operating area Figure 2. Thermal impedance
Figure 3.
Output characterisics
Figure 4.
Transfer characteristics
Figure 5.
Transconductance
Figure 6.
Static drain-source on resistance
6/13
STE45NK80ZD Figure 7. Gate charge vs gate-source voltage Figure 8.
Electrical characteristics Capacitance variations
Figure 9.
Normalized gate threshold voltage vs temperature
Figure 10. Normalized on resistance vs temperature
Figure 11. Source-drain diode forward characteristics
Figure 12. Normalized BVDSS vs temperature
7/13
Electrical characteristics Figure 13. Avalanche energy vs starting Tj
STE45NK80ZD
8/13
STE45NK80ZD
Test circuit
3
Test circuit
Figure 15. Unclamped inductive waveform
Figure 14. Unclamped Inductive load test circuit
Figure 16. Switching times test circuit for resistive load
Figure 17. Gate charge test circuit
Figure 18. Test circuit for inductive load switching and diode recovery times
9/13
Package mechanical data
STE45NK80ZD
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
10/13
STE45NK80ZD
Package mechanical data
ISOTOP MECHANICAL DATA
DIM. MIN. A B C D E F G H J K L M N O 11.8 8.9 1.95 0.75 12.6 25.15 31.5 4 4.1 14.9 30.1 37.8 4 7.8 8.2 4.3 15.1 30.3 38.2 mm TYP. MAX. 12.2 9.1 2.05 0.85 12.8 25.5 31.7 MIN. 0.466 0.350 0.076 0.029 0.496 0.990 1.240 0.157 0.161 0.586 1.185 1.488 0.157 0.307 0.322 0.169 0.594 1.193 1.503 inch TYP. MAX. 0.480 0.358 0.080 0.033 0.503 1.003 1.248
G O B
A
N
D E F
J K L M
H
C
11/13
Revision history
STE45NK80ZD
5
Revision history
Table 8.
Date 24-May-2005 10-Jun-2005 28-Sep-2005 14-Oct-2005 06-Mar-2006 29-Mar-2006 27-Jun-2006
Document revision history
Revision 1 2 3 4 5 6 7 First Release Inserted new row in Table 6.: Switching times Complete version Modified Figure 3, Figure 6 New Stylesheet Modified value on Table 4. New template, no content change Changes
12/13
STE45NK80ZD
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
(c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
13/13

▲Up To Search▲

Price & Availability of STE45NK80ZD06

	To Download STE45NK80ZD06 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .